Termination w.r.t. Q of the following Term Rewriting System could be proven:
Q restricted rewrite system:
The TRS R consists of the following rules:
tower(0(x1)) → s(0(p(s(p(s(x1))))))
tower(s(x1)) → p(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
twoto(0(x1)) → s(0(x1))
twoto(s(x1)) → p(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
twice(0(x1)) → 0(x1)
twice(s(x1)) → p(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
p(p(s(x1))) → p(x1)
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
Q is empty.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
Q restricted rewrite system:
The TRS R consists of the following rules:
tower(0(x1)) → s(0(p(s(p(s(x1))))))
tower(s(x1)) → p(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
twoto(0(x1)) → s(0(x1))
twoto(s(x1)) → p(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
twice(0(x1)) → 0(x1)
twice(s(x1)) → p(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
p(p(s(x1))) → p(x1)
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
Q is empty.
We have reversed the following QTRS:
The set of rules R is
tower(0(x1)) → s(0(p(s(p(s(x1))))))
tower(s(x1)) → p(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
twoto(0(x1)) → s(0(x1))
twoto(s(x1)) → p(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
twice(0(x1)) → 0(x1)
twice(s(x1)) → p(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
p(p(s(x1))) → p(x1)
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
The set Q is empty.
We have obtained the following QTRS:
0(tower(x)) → s(p(s(p(0(s(x))))))
s(tower(x)) → s(p(s(p(tower(s(p(s(p(twoto(s(p(s(p(x))))))))))))))
0(twoto(x)) → 0(s(x))
s(twoto(x)) → s(p(s(p(twoto(s(s(s(p(p(p(s(p(s(p(twice(s(p(s(s(p(s(s(p(s(s(p(p(p(s(p(p(x))))))))))))))))))))))))))))))))
0(twice(x)) → 0(x)
s(twice(x)) → s(s(s(p(p(p(twice(s(s(s(s(s(p(p(p(x)))))))))))))))
s(p(p(x))) → p(x)
s(p(x)) → x
0(p(x)) → s(s(s(s(s(s(s(s(0(x)))))))))
The set Q is empty.
↳ QTRS
↳ QTRS Reverse
↳ QTRS
↳ QTRS Reverse
↳ RRRPoloQTRSProof
Q restricted rewrite system:
The TRS R consists of the following rules:
0(tower(x)) → s(p(s(p(0(s(x))))))
s(tower(x)) → s(p(s(p(tower(s(p(s(p(twoto(s(p(s(p(x))))))))))))))
0(twoto(x)) → 0(s(x))
s(twoto(x)) → s(p(s(p(twoto(s(s(s(p(p(p(s(p(s(p(twice(s(p(s(s(p(s(s(p(s(s(p(p(p(s(p(p(x))))))))))))))))))))))))))))))))
0(twice(x)) → 0(x)
s(twice(x)) → s(s(s(p(p(p(twice(s(s(s(s(s(p(p(p(x)))))))))))))))
s(p(p(x))) → p(x)
s(p(x)) → x
0(p(x)) → s(s(s(s(s(s(s(s(0(x)))))))))
Q is empty.
We have reversed the following QTRS:
The set of rules R is
tower(0(x1)) → s(0(p(s(p(s(x1))))))
tower(s(x1)) → p(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
twoto(0(x1)) → s(0(x1))
twoto(s(x1)) → p(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
twice(0(x1)) → 0(x1)
twice(s(x1)) → p(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
p(p(s(x1))) → p(x1)
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
The set Q is empty.
We have obtained the following QTRS:
0(tower(x)) → s(p(s(p(0(s(x))))))
s(tower(x)) → s(p(s(p(tower(s(p(s(p(twoto(s(p(s(p(x))))))))))))))
0(twoto(x)) → 0(s(x))
s(twoto(x)) → s(p(s(p(twoto(s(s(s(p(p(p(s(p(s(p(twice(s(p(s(s(p(s(s(p(s(s(p(p(p(s(p(p(x))))))))))))))))))))))))))))))))
0(twice(x)) → 0(x)
s(twice(x)) → s(s(s(p(p(p(twice(s(s(s(s(s(p(p(p(x)))))))))))))))
s(p(p(x))) → p(x)
s(p(x)) → x
0(p(x)) → s(s(s(s(s(s(s(s(0(x)))))))))
The set Q is empty.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ QTRS
↳ RRRPoloQTRSProof
Q restricted rewrite system:
The TRS R consists of the following rules:
0(tower(x)) → s(p(s(p(0(s(x))))))
s(tower(x)) → s(p(s(p(tower(s(p(s(p(twoto(s(p(s(p(x))))))))))))))
0(twoto(x)) → 0(s(x))
s(twoto(x)) → s(p(s(p(twoto(s(s(s(p(p(p(s(p(s(p(twice(s(p(s(s(p(s(s(p(s(s(p(p(p(s(p(p(x))))))))))))))))))))))))))))))))
0(twice(x)) → 0(x)
s(twice(x)) → s(s(s(p(p(p(twice(s(s(s(s(s(p(p(p(x)))))))))))))))
s(p(p(x))) → p(x)
s(p(x)) → x
0(p(x)) → s(s(s(s(s(s(s(s(0(x)))))))))
Q is empty.
The following Q TRS is given: Q restricted rewrite system:
The TRS R consists of the following rules:
tower(0(x1)) → s(0(p(s(p(s(x1))))))
tower(s(x1)) → p(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
twoto(0(x1)) → s(0(x1))
twoto(s(x1)) → p(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
twice(0(x1)) → 0(x1)
twice(s(x1)) → p(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
p(p(s(x1))) → p(x1)
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
Q is empty.
The following rules can be removed by the rule removal processor [15] because they are oriented strictly by a polynomial ordering:
tower(0(x1)) → s(0(p(s(p(s(x1))))))
Used ordering:
Polynomial interpretation [25]:
POL(0(x1)) = x1
POL(p(x1)) = x1
POL(s(x1)) = x1
POL(tower(x1)) = 2 + x1
POL(twice(x1)) = x1
POL(twoto(x1)) = x1
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
Q restricted rewrite system:
The TRS R consists of the following rules:
tower(s(x1)) → p(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
twoto(0(x1)) → s(0(x1))
twoto(s(x1)) → p(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
twice(0(x1)) → 0(x1)
twice(s(x1)) → p(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
p(p(s(x1))) → p(x1)
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
Q is empty.
Using Dependency Pairs [1,15] we result in the following initial DP problem:
Q DP problem:
The TRS P consists of the following rules:
TWOTO(s(x1)) → P(s(x1))
TOWER(s(x1)) → P(s(tower(p(s(p(s(x1)))))))
TWICE(s(x1)) → P(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1))))))))))))))
TWICE(s(x1)) → P(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
TOWER(s(x1)) → P(s(p(s(x1))))
TWOTO(s(x1)) → P(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))
TWOTO(s(x1)) → P(s(p(p(p(s(s(s(twoto(p(s(p(s(x1)))))))))))))
TWOTO(s(x1)) → P(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1)))))))))))))))))))))))))))
TOWER(s(x1)) → P(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
TWOTO(s(x1)) → TWOTO(p(s(p(s(x1)))))
TWOTO(s(x1)) → P(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1)))))))))))))))))))))
TWOTO(s(x1)) → P(s(s(s(twoto(p(s(p(s(x1)))))))))
TWOTO(s(x1)) → P(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
TOWER(s(x1)) → TOWER(p(s(p(s(x1)))))
TWOTO(s(x1)) → TWICE(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))
TWOTO(s(x1)) → P(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1)))))))))))))))))))))))))))))))
P(p(s(x1))) → P(x1)
TOWER(s(x1)) → P(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))
TWOTO(s(x1)) → P(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))
TWICE(s(x1)) → P(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))
TOWER(s(x1)) → P(s(x1))
TWOTO(s(x1)) → P(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))
TWOTO(s(x1)) → P(s(p(s(x1))))
TWOTO(s(x1)) → P(p(p(s(s(s(twoto(p(s(p(s(x1)))))))))))
TWICE(s(x1)) → P(s(s(s(x1))))
TWOTO(s(x1)) → P(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1)))))))))))))))
TOWER(s(x1)) → TWOTO(p(s(p(s(tower(p(s(p(s(x1))))))))))
TWOTO(s(x1)) → P(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1)))))))))))))))))))))))))))))
TWOTO(s(x1)) → P(p(s(s(s(twoto(p(s(p(s(x1))))))))))
TWICE(s(x1)) → P(p(p(s(s(s(x1))))))
TWICE(s(x1)) → P(p(s(s(s(x1)))))
TWICE(s(x1)) → TWICE(p(p(p(s(s(s(x1)))))))
TOWER(s(x1)) → P(s(p(s(tower(p(s(p(s(x1)))))))))
The TRS R consists of the following rules:
tower(s(x1)) → p(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
twoto(0(x1)) → s(0(x1))
twoto(s(x1)) → p(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
twice(0(x1)) → 0(x1)
twice(s(x1)) → p(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
p(p(s(x1))) → p(x1)
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
Q DP problem:
The TRS P consists of the following rules:
TWOTO(s(x1)) → P(s(x1))
TOWER(s(x1)) → P(s(tower(p(s(p(s(x1)))))))
TWICE(s(x1)) → P(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1))))))))))))))
TWICE(s(x1)) → P(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
TOWER(s(x1)) → P(s(p(s(x1))))
TWOTO(s(x1)) → P(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))
TWOTO(s(x1)) → P(s(p(p(p(s(s(s(twoto(p(s(p(s(x1)))))))))))))
TWOTO(s(x1)) → P(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1)))))))))))))))))))))))))))
TOWER(s(x1)) → P(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
TWOTO(s(x1)) → TWOTO(p(s(p(s(x1)))))
TWOTO(s(x1)) → P(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1)))))))))))))))))))))
TWOTO(s(x1)) → P(s(s(s(twoto(p(s(p(s(x1)))))))))
TWOTO(s(x1)) → P(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
TOWER(s(x1)) → TOWER(p(s(p(s(x1)))))
TWOTO(s(x1)) → TWICE(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))
TWOTO(s(x1)) → P(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1)))))))))))))))))))))))))))))))
P(p(s(x1))) → P(x1)
TOWER(s(x1)) → P(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))
TWOTO(s(x1)) → P(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))
TWICE(s(x1)) → P(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))
TOWER(s(x1)) → P(s(x1))
TWOTO(s(x1)) → P(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))
TWOTO(s(x1)) → P(s(p(s(x1))))
TWOTO(s(x1)) → P(p(p(s(s(s(twoto(p(s(p(s(x1)))))))))))
TWICE(s(x1)) → P(s(s(s(x1))))
TWOTO(s(x1)) → P(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1)))))))))))))))
TOWER(s(x1)) → TWOTO(p(s(p(s(tower(p(s(p(s(x1))))))))))
TWOTO(s(x1)) → P(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1)))))))))))))))))))))))))))))
TWOTO(s(x1)) → P(p(s(s(s(twoto(p(s(p(s(x1))))))))))
TWICE(s(x1)) → P(p(p(s(s(s(x1))))))
TWICE(s(x1)) → P(p(s(s(s(x1)))))
TWICE(s(x1)) → TWICE(p(p(p(s(s(s(x1)))))))
TOWER(s(x1)) → P(s(p(s(tower(p(s(p(s(x1)))))))))
The TRS R consists of the following rules:
tower(s(x1)) → p(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
twoto(0(x1)) → s(0(x1))
twoto(s(x1)) → p(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
twice(0(x1)) → 0(x1)
twice(s(x1)) → p(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
p(p(s(x1))) → p(x1)
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [15,17,22] contains 4 SCCs with 29 less nodes.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ UsableRulesProof
↳ UsableRulesProof
↳ QDP
↳ QDP
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
P(p(s(x1))) → P(x1)
The TRS R consists of the following rules:
tower(s(x1)) → p(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
twoto(0(x1)) → s(0(x1))
twoto(s(x1)) → p(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
twice(0(x1)) → 0(x1)
twice(s(x1)) → p(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
p(p(s(x1))) → p(x1)
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We can use the usable rules and reduction pair processor [15] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its argument. Then, we can delete all non-usable rules [17] from R.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QDP
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
P(p(s(x1))) → P(x1)
R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We can use the usable rules and reduction pair processor [15] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its argument. Then, we can delete all non-usable rules [17] from R.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ UsableRulesProof
↳ UsableRulesProof
↳ QDP
↳ UsableRulesReductionPairsProof
↳ QDP
↳ QDP
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
P(p(s(x1))) → P(x1)
R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By using the usable rules with reduction pair processor [15] with a polynomial ordering [25], all dependency pairs and the corresponding usable rules [17] can be oriented non-strictly. All non-usable rules are removed, and those dependency pairs and usable rules that have been oriented strictly or contain non-usable symbols in their left-hand side are removed as well.
The following dependency pairs can be deleted:
P(p(s(x1))) → P(x1)
No rules are removed from R.
Used ordering: POLO with Polynomial interpretation [25]:
POL(P(x1)) = 2·x1
POL(p(x1)) = 2·x1
POL(s(x1)) = 2·x1
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ UsableRulesProof
↳ UsableRulesProof
↳ QDP
↳ UsableRulesReductionPairsProof
↳ QDP
↳ PisEmptyProof
↳ QDP
↳ QDP
↳ QDP
Q DP problem:
P is empty.
R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWICE(s(x1)) → TWICE(p(p(p(s(s(s(x1)))))))
The TRS R consists of the following rules:
tower(s(x1)) → p(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
twoto(0(x1)) → s(0(x1))
twoto(s(x1)) → p(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
twice(0(x1)) → 0(x1)
twice(s(x1)) → p(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
p(p(s(x1))) → p(x1)
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the modular non-overlap check [15] to enlarge Q to all left-hand sides of R.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ MNOCProof
↳ QDP
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWICE(s(x1)) → TWICE(p(p(p(s(s(s(x1)))))))
The TRS R consists of the following rules:
tower(s(x1)) → p(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
twoto(0(x1)) → s(0(x1))
twoto(s(x1)) → p(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
twice(0(x1)) → 0(x1)
twice(s(x1)) → p(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
p(p(s(x1))) → p(x1)
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
The set Q consists of the following terms:
tower(s(x0))
twoto(0(x0))
twoto(s(x0))
twice(0(x0))
twice(s(x0))
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
As all Q-normal forms are R-normal forms we are in the innermost case. Hence, by the usable rules processor [15] we can delete all non-usable rules [17] from R.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ MNOCProof
↳ QDP
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWICE(s(x1)) → TWICE(p(p(p(s(s(s(x1)))))))
The TRS R consists of the following rules:
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
The set Q consists of the following terms:
tower(s(x0))
twoto(0(x0))
twoto(s(x0))
twice(0(x0))
twice(s(x0))
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
We deleted the following terms from Q as each root-symbol of these terms does neither occur in P nor in R.
tower(s(x0))
twoto(0(x0))
twoto(s(x0))
twice(0(x0))
twice(s(x0))
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWICE(s(x1)) → TWICE(p(p(p(s(s(s(x1)))))))
The TRS R consists of the following rules:
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
The set Q consists of the following terms:
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
We use the modular non-overlap check [17] to decrease Q to the empty set.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ MNOCProof
↳ QDP
↳ MNOCProof
↳ QDP
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWICE(s(x1)) → TWICE(p(p(p(s(s(s(x1)))))))
The TRS R consists of the following rules:
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
Q is empty.
We have to consider all (P,Q,R)-chains.
We use the modular non-overlap check [15] to enlarge Q to all left-hand sides of R.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWICE(s(x1)) → TWICE(p(p(p(s(s(s(x1)))))))
The TRS R consists of the following rules:
tower(s(x1)) → p(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
twoto(0(x1)) → s(0(x1))
twoto(s(x1)) → p(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
twice(0(x1)) → 0(x1)
twice(s(x1)) → p(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
p(p(s(x1))) → p(x1)
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
The set Q consists of the following terms:
tower(s(x0))
twoto(0(x0))
twoto(s(x0))
twice(0(x0))
twice(s(x0))
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
As all Q-normal forms are R-normal forms we are in the innermost case. Hence, by the usable rules processor [15] we can delete all non-usable rules [17] from R.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWICE(s(x1)) → TWICE(p(p(p(s(s(s(x1)))))))
The TRS R consists of the following rules:
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
The set Q consists of the following terms:
tower(s(x0))
twoto(0(x0))
twoto(s(x0))
twice(0(x0))
twice(s(x0))
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
We deleted the following terms from Q as each root-symbol of these terms does neither occur in P nor in R.
tower(s(x0))
twoto(0(x0))
twoto(s(x0))
twice(0(x0))
twice(s(x0))
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWICE(s(x1)) → TWICE(p(p(p(s(s(s(x1)))))))
The TRS R consists of the following rules:
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
The set Q consists of the following terms:
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
By rewriting [15] the rule TWICE(s(x1)) → TWICE(p(p(p(s(s(s(x1))))))) at position [0,0,0] we obtained the following new rules:
TWICE(s(x1)) → TWICE(p(p(s(s(x1)))))
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
↳ Rewriting
↳ QDP
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWICE(s(x1)) → TWICE(p(p(s(s(x1)))))
The TRS R consists of the following rules:
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
The set Q consists of the following terms:
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
By rewriting [15] the rule TWICE(s(x1)) → TWICE(p(p(s(s(x1))))) at position [0,0] we obtained the following new rules:
TWICE(s(x1)) → TWICE(p(s(x1)))
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
↳ Rewriting
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWICE(s(x1)) → TWICE(p(s(x1)))
The TRS R consists of the following rules:
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
The set Q consists of the following terms:
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
As all Q-normal forms are R-normal forms we are in the innermost case. Hence, by the usable rules processor [15] we can delete all non-usable rules [17] from R.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
↳ Rewriting
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ Rewriting
↳ QDP
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWICE(s(x1)) → TWICE(p(s(x1)))
The TRS R consists of the following rules:
p(s(x1)) → x1
The set Q consists of the following terms:
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
By rewriting [15] the rule TWICE(s(x1)) → TWICE(p(s(x1))) at position [0] we obtained the following new rules:
TWICE(s(x1)) → TWICE(x1)
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
↳ Rewriting
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ Rewriting
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWICE(s(x1)) → TWICE(x1)
The TRS R consists of the following rules:
p(s(x1)) → x1
The set Q consists of the following terms:
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
As all Q-normal forms are R-normal forms we are in the innermost case. Hence, by the usable rules processor [15] we can delete all non-usable rules [17] from R.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
↳ Rewriting
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ Rewriting
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWICE(s(x1)) → TWICE(x1)
R is empty.
The set Q consists of the following terms:
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
We deleted the following terms from Q as each root-symbol of these terms does neither occur in P nor in R.
p(s(x0))
p(0(x0))
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
↳ Rewriting
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ Rewriting
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ UsableRulesReductionPairsProof
↳ QDP
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWICE(s(x1)) → TWICE(x1)
R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By using the usable rules with reduction pair processor [15] with a polynomial ordering [25], all dependency pairs and the corresponding usable rules [17] can be oriented non-strictly. All non-usable rules are removed, and those dependency pairs and usable rules that have been oriented strictly or contain non-usable symbols in their left-hand side are removed as well.
The following dependency pairs can be deleted:
TWICE(s(x1)) → TWICE(x1)
No rules are removed from R.
Used ordering: POLO with Polynomial interpretation [25]:
POL(TWICE(x1)) = 2·x1
POL(s(x1)) = 2·x1
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
↳ Rewriting
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ Rewriting
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ UsableRulesReductionPairsProof
↳ QDP
↳ PisEmptyProof
↳ QDP
↳ QDP
Q DP problem:
P is empty.
R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWOTO(s(x1)) → TWOTO(p(s(p(s(x1)))))
The TRS R consists of the following rules:
tower(s(x1)) → p(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
twoto(0(x1)) → s(0(x1))
twoto(s(x1)) → p(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
twice(0(x1)) → 0(x1)
twice(s(x1)) → p(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
p(p(s(x1))) → p(x1)
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the modular non-overlap check [15] to enlarge Q to all left-hand sides of R.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ MNOCProof
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWOTO(s(x1)) → TWOTO(p(s(p(s(x1)))))
The TRS R consists of the following rules:
tower(s(x1)) → p(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
twoto(0(x1)) → s(0(x1))
twoto(s(x1)) → p(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
twice(0(x1)) → 0(x1)
twice(s(x1)) → p(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
p(p(s(x1))) → p(x1)
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
The set Q consists of the following terms:
tower(s(x0))
twoto(0(x0))
twoto(s(x0))
twice(0(x0))
twice(s(x0))
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
As all Q-normal forms are R-normal forms we are in the innermost case. Hence, by the usable rules processor [15] we can delete all non-usable rules [17] from R.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ MNOCProof
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWOTO(s(x1)) → TWOTO(p(s(p(s(x1)))))
The TRS R consists of the following rules:
p(s(x1)) → x1
The set Q consists of the following terms:
tower(s(x0))
twoto(0(x0))
twoto(s(x0))
twice(0(x0))
twice(s(x0))
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
We deleted the following terms from Q as each root-symbol of these terms does neither occur in P nor in R.
tower(s(x0))
twoto(0(x0))
twoto(s(x0))
twice(0(x0))
twice(s(x0))
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ QReductionProof
↳ MNOCProof
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWOTO(s(x1)) → TWOTO(p(s(p(s(x1)))))
The TRS R consists of the following rules:
p(s(x1)) → x1
The set Q consists of the following terms:
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
We deleted the following terms from Q as they contain symbols which do neither occur in P nor in R.
p(0(x0))
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWOTO(s(x1)) → TWOTO(p(s(p(s(x1)))))
The TRS R consists of the following rules:
p(s(x1)) → x1
The set Q consists of the following terms:
p(s(x0))
We have to consider all (P,Q,R)-chains.
We use the modular non-overlap check [17] to decrease Q to the empty set.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ MNOCProof
↳ QDP
↳ MNOCProof
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWOTO(s(x1)) → TWOTO(p(s(p(s(x1)))))
The TRS R consists of the following rules:
p(s(x1)) → x1
Q is empty.
We have to consider all (P,Q,R)-chains.
We use the modular non-overlap check [15] to enlarge Q to all left-hand sides of R.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWOTO(s(x1)) → TWOTO(p(s(p(s(x1)))))
The TRS R consists of the following rules:
tower(s(x1)) → p(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
twoto(0(x1)) → s(0(x1))
twoto(s(x1)) → p(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
twice(0(x1)) → 0(x1)
twice(s(x1)) → p(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
p(p(s(x1))) → p(x1)
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
The set Q consists of the following terms:
tower(s(x0))
twoto(0(x0))
twoto(s(x0))
twice(0(x0))
twice(s(x0))
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
As all Q-normal forms are R-normal forms we are in the innermost case. Hence, by the usable rules processor [15] we can delete all non-usable rules [17] from R.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWOTO(s(x1)) → TWOTO(p(s(p(s(x1)))))
The TRS R consists of the following rules:
p(s(x1)) → x1
The set Q consists of the following terms:
tower(s(x0))
twoto(0(x0))
twoto(s(x0))
twice(0(x0))
twice(s(x0))
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
We deleted the following terms from Q as each root-symbol of these terms does neither occur in P nor in R.
tower(s(x0))
twoto(0(x0))
twoto(s(x0))
twice(0(x0))
twice(s(x0))
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWOTO(s(x1)) → TWOTO(p(s(p(s(x1)))))
The TRS R consists of the following rules:
p(s(x1)) → x1
The set Q consists of the following terms:
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
By rewriting [15] the rule TWOTO(s(x1)) → TWOTO(p(s(p(s(x1))))) at position [0] we obtained the following new rules:
TWOTO(s(x1)) → TWOTO(p(s(x1)))
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
↳ Rewriting
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWOTO(s(x1)) → TWOTO(p(s(x1)))
The TRS R consists of the following rules:
p(s(x1)) → x1
The set Q consists of the following terms:
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
By rewriting [15] the rule TWOTO(s(x1)) → TWOTO(p(s(x1))) at position [0] we obtained the following new rules:
TWOTO(s(x1)) → TWOTO(x1)
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
↳ Rewriting
↳ QDP
↳ UsableRulesProof
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWOTO(s(x1)) → TWOTO(x1)
The TRS R consists of the following rules:
p(s(x1)) → x1
The set Q consists of the following terms:
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
As all Q-normal forms are R-normal forms we are in the innermost case. Hence, by the usable rules processor [15] we can delete all non-usable rules [17] from R.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
↳ Rewriting
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWOTO(s(x1)) → TWOTO(x1)
R is empty.
The set Q consists of the following terms:
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
We deleted the following terms from Q as each root-symbol of these terms does neither occur in P nor in R.
p(s(x0))
p(0(x0))
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
↳ Rewriting
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ UsableRulesReductionPairsProof
↳ QDP
Q DP problem:
The TRS P consists of the following rules:
TWOTO(s(x1)) → TWOTO(x1)
R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By using the usable rules with reduction pair processor [15] with a polynomial ordering [25], all dependency pairs and the corresponding usable rules [17] can be oriented non-strictly. All non-usable rules are removed, and those dependency pairs and usable rules that have been oriented strictly or contain non-usable symbols in their left-hand side are removed as well.
The following dependency pairs can be deleted:
TWOTO(s(x1)) → TWOTO(x1)
No rules are removed from R.
Used ordering: POLO with Polynomial interpretation [25]:
POL(TWOTO(x1)) = 2·x1
POL(s(x1)) = 2·x1
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
↳ Rewriting
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ UsableRulesReductionPairsProof
↳ QDP
↳ PisEmptyProof
↳ QDP
Q DP problem:
P is empty.
R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
Q DP problem:
The TRS P consists of the following rules:
TOWER(s(x1)) → TOWER(p(s(p(s(x1)))))
The TRS R consists of the following rules:
tower(s(x1)) → p(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
twoto(0(x1)) → s(0(x1))
twoto(s(x1)) → p(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
twice(0(x1)) → 0(x1)
twice(s(x1)) → p(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
p(p(s(x1))) → p(x1)
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the modular non-overlap check [15] to enlarge Q to all left-hand sides of R.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ MNOCProof
Q DP problem:
The TRS P consists of the following rules:
TOWER(s(x1)) → TOWER(p(s(p(s(x1)))))
The TRS R consists of the following rules:
tower(s(x1)) → p(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
twoto(0(x1)) → s(0(x1))
twoto(s(x1)) → p(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
twice(0(x1)) → 0(x1)
twice(s(x1)) → p(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
p(p(s(x1))) → p(x1)
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
The set Q consists of the following terms:
tower(s(x0))
twoto(0(x0))
twoto(s(x0))
twice(0(x0))
twice(s(x0))
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
As all Q-normal forms are R-normal forms we are in the innermost case. Hence, by the usable rules processor [15] we can delete all non-usable rules [17] from R.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ MNOCProof
Q DP problem:
The TRS P consists of the following rules:
TOWER(s(x1)) → TOWER(p(s(p(s(x1)))))
The TRS R consists of the following rules:
p(s(x1)) → x1
The set Q consists of the following terms:
tower(s(x0))
twoto(0(x0))
twoto(s(x0))
twice(0(x0))
twice(s(x0))
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
We deleted the following terms from Q as each root-symbol of these terms does neither occur in P nor in R.
tower(s(x0))
twoto(0(x0))
twoto(s(x0))
twice(0(x0))
twice(s(x0))
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ QReductionProof
↳ MNOCProof
Q DP problem:
The TRS P consists of the following rules:
TOWER(s(x1)) → TOWER(p(s(p(s(x1)))))
The TRS R consists of the following rules:
p(s(x1)) → x1
The set Q consists of the following terms:
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
We deleted the following terms from Q as they contain symbols which do neither occur in P nor in R.
p(0(x0))
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ MNOCProof
↳ MNOCProof
Q DP problem:
The TRS P consists of the following rules:
TOWER(s(x1)) → TOWER(p(s(p(s(x1)))))
The TRS R consists of the following rules:
p(s(x1)) → x1
The set Q consists of the following terms:
p(s(x0))
We have to consider all (P,Q,R)-chains.
We use the modular non-overlap check [17] to decrease Q to the empty set.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ MNOCProof
↳ QDP
↳ MNOCProof
Q DP problem:
The TRS P consists of the following rules:
TOWER(s(x1)) → TOWER(p(s(p(s(x1)))))
The TRS R consists of the following rules:
p(s(x1)) → x1
Q is empty.
We have to consider all (P,Q,R)-chains.
We use the modular non-overlap check [15] to enlarge Q to all left-hand sides of R.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
Q DP problem:
The TRS P consists of the following rules:
TOWER(s(x1)) → TOWER(p(s(p(s(x1)))))
The TRS R consists of the following rules:
tower(s(x1)) → p(s(p(s(twoto(p(s(p(s(tower(p(s(p(s(x1))))))))))))))
twoto(0(x1)) → s(0(x1))
twoto(s(x1)) → p(p(s(p(p(p(s(s(p(s(s(p(s(s(p(s(twice(p(s(p(s(p(p(p(s(s(s(twoto(p(s(p(s(x1))))))))))))))))))))))))))))))))
twice(0(x1)) → 0(x1)
twice(s(x1)) → p(p(p(s(s(s(s(s(twice(p(p(p(s(s(s(x1)))))))))))))))
p(p(s(x1))) → p(x1)
p(s(x1)) → x1
p(0(x1)) → 0(s(s(s(s(s(s(s(s(x1)))))))))
The set Q consists of the following terms:
tower(s(x0))
twoto(0(x0))
twoto(s(x0))
twice(0(x0))
twice(s(x0))
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
As all Q-normal forms are R-normal forms we are in the innermost case. Hence, by the usable rules processor [15] we can delete all non-usable rules [17] from R.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
Q DP problem:
The TRS P consists of the following rules:
TOWER(s(x1)) → TOWER(p(s(p(s(x1)))))
The TRS R consists of the following rules:
p(s(x1)) → x1
The set Q consists of the following terms:
tower(s(x0))
twoto(0(x0))
twoto(s(x0))
twice(0(x0))
twice(s(x0))
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
We deleted the following terms from Q as each root-symbol of these terms does neither occur in P nor in R.
tower(s(x0))
twoto(0(x0))
twoto(s(x0))
twice(0(x0))
twice(s(x0))
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
Q DP problem:
The TRS P consists of the following rules:
TOWER(s(x1)) → TOWER(p(s(p(s(x1)))))
The TRS R consists of the following rules:
p(s(x1)) → x1
The set Q consists of the following terms:
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
By rewriting [15] the rule TOWER(s(x1)) → TOWER(p(s(p(s(x1))))) at position [0] we obtained the following new rules:
TOWER(s(x1)) → TOWER(p(s(x1)))
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
↳ Rewriting
Q DP problem:
The TRS P consists of the following rules:
TOWER(s(x1)) → TOWER(p(s(x1)))
The TRS R consists of the following rules:
p(s(x1)) → x1
The set Q consists of the following terms:
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
By rewriting [15] the rule TOWER(s(x1)) → TOWER(p(s(x1))) at position [0] we obtained the following new rules:
TOWER(s(x1)) → TOWER(x1)
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
↳ Rewriting
↳ QDP
↳ UsableRulesProof
Q DP problem:
The TRS P consists of the following rules:
TOWER(s(x1)) → TOWER(x1)
The TRS R consists of the following rules:
p(s(x1)) → x1
The set Q consists of the following terms:
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
As all Q-normal forms are R-normal forms we are in the innermost case. Hence, by the usable rules processor [15] we can delete all non-usable rules [17] from R.
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
↳ Rewriting
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
Q DP problem:
The TRS P consists of the following rules:
TOWER(s(x1)) → TOWER(x1)
R is empty.
The set Q consists of the following terms:
p(s(x0))
p(0(x0))
We have to consider all minimal (P,Q,R)-chains.
We deleted the following terms from Q as each root-symbol of these terms does neither occur in P nor in R.
p(s(x0))
p(0(x0))
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
↳ Rewriting
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ UsableRulesReductionPairsProof
Q DP problem:
The TRS P consists of the following rules:
TOWER(s(x1)) → TOWER(x1)
R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By using the usable rules with reduction pair processor [15] with a polynomial ordering [25], all dependency pairs and the corresponding usable rules [17] can be oriented non-strictly. All non-usable rules are removed, and those dependency pairs and usable rules that have been oriented strictly or contain non-usable symbols in their left-hand side are removed as well.
The following dependency pairs can be deleted:
TOWER(s(x1)) → TOWER(x1)
No rules are removed from R.
Used ordering: POLO with Polynomial interpretation [25]:
POL(TOWER(x1)) = 2·x1
POL(s(x1)) = 2·x1
↳ QTRS
↳ QTRS Reverse
↳ QTRS Reverse
↳ RRRPoloQTRSProof
↳ QTRS
↳ DependencyPairsProof
↳ QDP
↳ DependencyGraphProof
↳ AND
↳ QDP
↳ QDP
↳ QDP
↳ QDP
↳ MNOCProof
↳ MNOCProof
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ Rewriting
↳ QDP
↳ Rewriting
↳ QDP
↳ UsableRulesProof
↳ QDP
↳ QReductionProof
↳ QDP
↳ UsableRulesReductionPairsProof
↳ QDP
↳ PisEmptyProof
Q DP problem:
P is empty.
R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.